On the Road to Austerlitz: A 6mm Early Napoleonics Project
Recommendations: 341
About the Project
As voted by you guys I'll be tackling a 6mm Napoleonic project. I've already got some 28mm Peninsular War British v French so decided to go for my next favourite period. Let's dive into the 1800-1805 Period. From Marengo to Austerlitz.
Related Company: Eureka Miniatures
Related Genre: Historical
This Project is Active
The Austrians Ready for Battle
The Austrian Part of the Alliance is ready for the tabletop.
No time to rest however and the Russians are Primed and ready to start soon. Anyone who has any ideas on how I can base the Russians please leave a comment. I want the different forces to be recognisable by their outlines and since the Austrians are famous for their size and the French for their Columns those two are easy but Russia is a bit tricky.
Austrian Advanced Guard and General O'Reilly
This one needs a bit of explaining. The Scenario list for the Battle that I’m following has this Advanced Guard as Two Brigades but on paper it was much larger but paper can be deceiving.
On Paper there were 3 Uhlan Regiments and a Regiment of Hussars so you would expect at least 2 Bases. However two of those Uhlan units had 40 and 100 men meaning it was easier to just merge them all in to one unit. I have put the Hussars out in front to represent them screening and skirmishing for the Ulhan Lancers.
The Horse Battery I painted earlier belongs to this unit.
The Grenzer Brigade. These were Lighter Troops recruited from the Border. Grenzer means Borderer or Border Guard or something to that effect.This next part required explanation. The next Brigade would be O’Reilly’s Brigade. Originally I thought this was another case like the Russian General MacDonald who is a descendant of foreign immigrants but Andreas O’Reilly was a genuine Irishman who joined the Austrian Army at the age of 14 at the start of the Seven Years War (1756-1763 the North American Part is known as the French and Indian War).
He purchased his Commission and by 1779 was a Major, married into a Noble Family he himself was related to nobility, he was the youngest son of a Baronet, the lowest level of Nobility in the British system and an Irish one at that so think the lowest of the low when it comes to Nobility, he really had no prospects as an aristocrat.
Ten years later he became an Austrian Nobleman (A Graf or Count much higher than his Families Baronet) and promoted to command a Regiment. When the French decided to murder their rightful King he was promoted to General-Major and given control of a Brigade. He spent the next 5 years commanding mixed Grenzer/Light Cavalry Brigades doing quite well.
O’Reilly was not the greatest General when it came to actual fighting but where he excelled was when everyone else was panicking. He was overly cautious (a rare trait for a Light Cavalry Officer of this era) but when he needed to do his main job of screening the advance or retreat of an army he did an excellent job.
At the age of 63 he was given control of Vienna after everyone else had screwed up the evacuation and was forced to surrender the city. He ended up living to 89 as an Austrian Nobleman and General der Kavallerie. Not bad for some very minor Irish nobilities youngest son from County Roscommon.
I plan on doing a video on him for my YouTube Channel now that I’m settled in to my new place. https://www.youtube.com/c/AnotherHistorianWargamer/videos
Ladies and Gentleman I give you Feldmarschallleutnant Andreas Graf O’Reilly von Ballinlough.
The Artillery
I had enough Artillery to put together a Horse Artillery Battery and since that’s half of the Batteries the Austrians need I quickly put one together.
The Austrians had similar batteries to the British which made it easier for me since British Artillery is something I know quite a bit about. They weren’t used in the same way as the British (they had twice as many rounds for starters) but the composition is all I’m worried about and that lines up.
Limbers aren't technically needed but I want to be flexible for other systems also it looks cool and I want this army to double as a display piece. The goal would be to have a display cabinet of the forces at Austerlitz
The other side. Since the men wear brown and the guns are brown I tried to stay away from that light brown for the horses, also I haven't figured out how to make Black horses look good yet so that's out too.
The Limbers and Guns. Irregular Miniatures sell the Limbers with the guns. It is a little off here but the Limbers are also on 60 x 30 bases so they line upCommand Base
The Austrian Heavy Cavalry
Here are the Cuirassiers, I left the Cuirasses Black since most source pictures I can find have them as Black and metal looked wrong on such small minis.
These men are an amalgamation of the two Cuirassier Brigades of Liechtenstein’s Column. The scenario I am basing this on has amalgamated them since there was only 600-ish men per Brigade.
I originally had the Regiment all with swords down Charging but it looked odd so I swapped the rear rank with the front rank of the rear Regiments.
Again on the paddlepop sticks, I was a bit hesitant about using these coming from 28mm painting while holding a base but this is much easier for 6mm
I originally had the front Regiment at the Charge with the rear advancing but it looked strange so I swapped the rear rank with the front rank.The Brigade Complete
Here’s the completed Brigade. I went for my universal Dark Brown, Light Brown Drybrush and Bright Green Flock that I use for everything from 40K to Historical.
Let me know if you like or don’t like this set up.
Here’s what I’ve got to do
Austrian Cuirassiers
Austrian Infantry Brigade
Austrian Infantry Brigade
Austrian Infantry Brigade
Grenzer Brigade
Austrian Lancer/Hussar Brigade
Austrian Horse Artillery
I didn't bother trying to base in-between the strips, the ground is going to be dark and the men are so close together that it won't matter. An Artistic man might say they're trying to give the hint of a shadow but I am not that man.
I didn't want to overload the base with Officers, one giving the rear Colonel a Message and the brigade Commander leading the brigade was enough for me.
It's starting to take shape, the next step is a light brown drybrush but I do it almost simultaneously with the flocking so I didn't take a picture.
It might not show up but the Officers have been painted in Grey since they're in the Austrian Grey Greatcoat.Oh no wide shot of the whole Brigade? Don't worry it's in the next one
Some Terrain
Here is some 6mm Terrain made with this project in mind but made to be universal. It’s all 2mm Irregular Miniatures Terrain from Eureka here in Australia.
It might seem weird to use 2mm Terrain with 6mm minis and I’ll address that in the next instalment.
The large terrain is based on a CD, I use the shiny side scuffed up with sandpaper. I like to then paint the surface Black to avoid any tiny gaps shining through
Rhinox Hide for the base (I think, this is just for me when I forget and need to come back here to remember it again).The First Brigade
Merry Christmas Everyone!
I’ve had some spare time and here’s the first Brigade based up ready for basing and grass.
I decided to go for a 100mm x 100mm base on a 3mm hick Plasticard although for this first one I used an old GW Movement Tray for convenience.
Also I had miscalculated the frontage of a strip, I had based my measurements on the 6mm ACW minis from the same company but those minis are far more spread out and 6 men have a 30mm frontage compared to these 6 men who have a 20mm frontage.
So I went for a 4 x 4 block of 16 strips.
This gives me a full Brigade of 192 Regulars plus Commanders and Skirmishers means each Brigade has around 200 men on it.
In the first version I wrongly called this a Division when it’s only a Brigade which is much better for me because it gives me more of the Mass effect I’m looking for.
Almost everything clipped from the Paddle Pop Sticks and ready to glue. I normally attatch them with GW Liquid Green Stuff since it bonds just well enough to hold but comes off very easily but I didn't have enough and these are done with very thin Super Glue.


















































































