Wolsung by Poentje

Now it works,

I had to change the name of the picture from Sturmbannführer Jurgen to Sturmbannfuhrer Jurgen.

For the Ven Rier Agents I painted a hero:

Sturmbannführer Jurgen

And some henchmen, these are two Zombie Soldiers

For the Inventors I painted Onuphrius Myshkin and his Mice

I painted up some henchmen for the Triad of the Lotus Dragon.

Kasunda

An Orc Fisherman

And an Orc trader

This is my latest addition to the Wolsung table. It’s the Barrel Riders Barracks from the latest Kickstarter campaign (Rise of the Halflings) by Printable Scenery. I think it fits right in Lyonesse, but maybe I should have printed it out at 110%.

All it needs now is a splash of paint.

Last friday I played a game of Wolsung with my friend. It was the first game in a realy long time, but was very nice. We built up the table with most of my scenery I have available for Wolsung. I still have some buildings I have to put together and some unfinished projects, so in the near future there will be more options for scenery.

I also made some group pictures of my finished models.

My Ven Rier faction is coming along nicely. I painted two ghouls and six zombies.

This means I only have 3 models to go to finish my Ven Rier faction.

I also finished my last model for the Scylla faction: Julia Vendetta.

I’ve been painting some more Ven Rier models.

Jonathan Wormwood was feeling a bit lonely so I painted his little friend Ursula.

And a shot of them together

I also painted a Ogre Zombie

And a Necrogolem workshop

Which is a spawnpoint for the Necrogolems

And a shot of them together

I’ve painted some Wolsung models.

First up: Jonathan Wormwood from the Ven Rier faction.

Next uo is a Security golem from the Inventors faction.

And I painted a Zitrone “Dime”. It’s scenery but can also be used in game to transport figures around the table and do drive-by shootings.

It’s been a while since I updated this project. I finished (except for maybe some weathering) the 3 story Block of Flats by Micro Art Studios.

First a comparison between the smaller and the bigger BoF, it’s made up out of two model kits.

Here are some pictures of the exterior.

And some pictures of the interior. Wallpaper and wooden floors all around.

The Ground floor:

First floor:

And the second floor:

The last couple of weeks I did a little bit of printing, the second level of the hull is now finished.

The rest of my time I spent on a new table which I built with my friend/neighbour.

https://www.beastsofwar.com/project/1661086/

The last couple of weeks I’ve been printing the airship. It still isn’t finished completely but I’m making some progress. The blimp is complete (and weighs in at 2050 grams). The 1st level of the hull is complete except for the interior walls. The 3rd level of the hull is also complete except for the railings. Here are some pics with a Wolsung mini for scale.

I need to fill some gaps before I can paint the airship. I think I will use Milliput for this. If anybody has a better idea, please let me know.

Also I have built a block of flats, I bought two kits at Micro Art Studios. I have split them up in a 1-story and 3-story building. The smallest of the two is finished. For the larger building I need more coffeestirrers for the wooden floor on the ground level. So on monday I’ll have an office day (I work at a coffee company) and take some home with me :-).

This evening I started a new print for the airship. It’s a part of the blimp and takes 56 hours to complete. I already printed some parts last week.

Today I painted the train in a couple of hours.

It was an easy paintjob: black primer, some drybrushing, a couple of details and a wash.

Hope you like it.

A couple of weeks ago I bought some extra terrain for Wolsung at Micro Art Studios at a great deal and it has arrived. It was a big box containing the Warehouse, 2 blocks of flats, 2 walkways and 2 cars. The cars I have put together, but the building I haven’t started yet.

While I was wandering through the projects system I saw some more terrain I liked by Sarissa Precision in the projectblog by @henrileite https://www.beastsofwar.com/project/1631390/

So I bought the 28mm steam train with a couple of wagons. It’s a very nice set to put together, now to find the time to put some paint on it.

In the meantime I’m also 3D printing an airship from the Skies of Sordane range. It’s a very nice model, but it’s gonna be big, about 50 cm long.

So I have enough hobbytime ahead of me.

It’s been a while since I spent some time on the construction of the mansion.

Today I got the basic construction of the roof roughly done (glue is drying now)

Next steps are detailing of the roof, making a balcony on the first floor and putting in the windows.

While I’m waiting for the glue to dry I’m already starting my next building.

A couple of months ago I bought a very nice book: ‘Buildings, tabletop terrain from XPS foam’. It was a kickstarter (which I missed), but had the opportunity to buy it directly from the creator Gerard Boom from Shiftinglands.com.

It’s a very comprehensive book which goes in detail what techniques and tools you can use. It also shows you step-by-step how to build 14 different buildings. I’m going to make the factory (which is the most difficult build of the book) with some steampunk features.

Gerard told me when I picked up the book that this print is a one-off.

When it runs out-of-stock it will not be printed again.

Here are two heroes for the Ven Rier Agents faction.

They have been on my to-do-list since I received my Kickstarter pledge (back in 2015).

First up: Adela ven Uss

And also finished is Herr Frost.

Slowly progressing through my pile of Wolsung minis.

This is Captain Frederik Olafson with his flaming sword.

He was my last unpainted mini from the Ash & Oak faction.

One of these days I’m going to make a group shot of the entire faction.

Maybe in their new mansion (when I get it finished).

It’s been a while since I updated this project. I made some progress on the mansion.

It’s made of XPS-foam and foamboard, the foamboard does warp a bit due to paints and glues, so in the future I wanna try to use only XPS.

Here are some pictures of the progress.

First up pictures of the outsides.

Next some topview images.

And some pictures of the groundfloor.

The next steps will be some extra detailing on the interior.

All the windows have to be put in the walls.

On the right side of the building there will be an balcony.

And I have to construct the second floor/roof.

The construction of the ground floor for my mansion is almost ready.

I think this will be a proper HQ for the Ash & Oak faction.

I got inspired by the Mystic Mansion MDF-kit by Warcradle.

The corridor in the back will be playable because the top four steps and landing can be taken out.

Next steps will be to construct the first floor.

After that I will mod podge the foam parts, then some paint and decorating the inside walls with wallpaper.

For the roof section I have to figure out some things in the construction part.