Skip to toolbar
3D Printable Terrains

3D Printable Terrains

Supported by (Turn Off)

Project Blog by shingen Cult of Games Member

Recommendations: 127

About the Project

I like building terrain, a lot. But having limited storage I can own only that many different pieces. My way of coping with that conundrum is designing a lot of models, but only 3D printing a few. I know OTT plans to finally open additional part of the site dedicated to sharing 3D printable models, but until that happens I figured I could join thingiverse and its ease of use with project system to acquire more direct channel for feedback. Anyway, I’ve printed all the models presented below, but would love to hear back from others who 3D print or design their models on how could I improve them or change. If you have any ideas of terrain you’d like to print but can’t find, please let me know, maybe I could help.

This Project is Active

Simple bases - triplehex pattern

Tutoring 0
Skill 3
Idea 3
2 Comments

Simplest possible. Only extras they have are magnet slots and firing arc designators.

https://www.thingiverse.com/thing:3894456

Simple bases - triplehex pattern

Simple bridge/walkway for flat-packable buildings

Tutoring 0
Skill 3
Idea 3
No Comments

Just that, simple and effective.

https://www.thingiverse.com/thing:3864530

Simple bridge/walkway for flat-packable buildings

Coffin Hotel

Tutoring 0
Skill 3
Idea 3
No Comments

New week, new model. Photos show prototype, it was printed in different parts, but looks the same as the final model.

 

https://www.thingiverse.com/thing:3863375

 

 

SF Dungeon

Tutoring 0
Skill 4
Idea 6
No Comments

Nothing above what has already been presented in other project and in the forum, but I have published my walls on Thingiverse, so I figured I may paste the link here:

https://www.thingiverse.com/thing:3853395

SF Dungeon

Articulated circular template for Infinity the game

Tutoring 1
Skill 5
Idea 4
No Comments

Not a piece of terrain this time, but useful gaiming tool.

 

https://www.thingiverse.com/thing:3747418

Flat-Packable Infinity the Game Objective Room

Tutoring 0
Skill 5
Idea 4
No Comments

Title has it. This is very simple objective room aimed for all the tournament organizers, it takes minimum space (no floor versios in particular) and is easy to set up. I will probably add some details to that models but I think it works ok as is.

https://www.thingiverse.com/thing:3742582

Container B

Tutoring 2
Skill 8
Idea 8
No Comments

Back from vacations and ready to publish another simple model.

Container B

Flat-Packable Commercial Building V2

Tutoring 3
Skill 9
Idea 8
No Comments

This one is almost identical as the previous, only difference is (are) facade. Otherwise comes together the same way.

https://www.thingiverse.com/thing:3704035

Flat-Packable Commercial Building V2

Flat-Packable Commercial Building V1

Tutoring 4
Skill 9
Idea 9
No Comments

Another piece inspired by one of Corvus Belli’s paper sets. This one is flat-packable. Each wall, if printed as separate piece may be equipped with magnets (slots are 5,9 per 1,2 mm) and easily assembled and disassembled for packing. Roof is easily laid on top.

https://www.thingiverse.com/thing:3699595

Flat-Packable Commercial Building V1

Container A

Tutoring 4
Skill 9
Idea 7
No Comments

Simple cubical container inspired by piece of Operation: Red Veil set of paper terrain from Corvus Belli.

https://www.thingiverse.com/thing:3697872

Container A

Supported by (Turn Off)