Skip to toolbar
Gaslands Car

Gaslands Car

Supported by (Turn Off)

Project Blog by grbour Cult of Games Member

Recommendations: 1

About the Project

Modding and painting a car for Gaslands.

This Project is Completed

Modifications

Tutoring 0
Skill 0
Idea 1
No Comments
This is the original  car I used.This is the original car I used.
I separated the car to make painting easier. Then I added some bits from my bits box. I also masked off the areas I wanted to keep the original green.I separated the car to make painting easier. Then I added some bits from my bits box. I also masked off the areas I wanted to keep the original green.

Basing and hilights

Here I primed the car black then airbrushed black again to get the black to stand out more followed by a small amount of Vallejo Cold Grey on the top and edges of the car.

Then I based the rest of the parts with a regular brush. I used Reapers Tarnished Steel for the metal, Citadel Screaming Bell for the brass, and a glaze of Citadel Averland Sunset for the lights.

I then removed the masks and started sponged on Reapers Tarnished Steel on some of the edges.I then removed the masks and started sponged on Reapers Tarnished Steel on some of the edges.
Here I just sponged on some Dark Rust followed by Light Rust.Here I just sponged on some Dark Rust followed by Light Rust.

Finnished

For the windshield, I sprayed it black, glued every thing back together and applied a Satin varnish.For the windshield, I sprayed it black, glued every thing back together and applied a Satin varnish.

Supported by (Turn Off)