Skip to toolbar
Project Cornetto

Project Cornetto

Supported by (Turn Off)

“This is my design”

Tutoring 7
Skill 9
Idea 9
No Comments
So this is the image from the blog by The Solo Wargamer with his table design. I was so inspired by it, I had to make my own. Naturally I brought my own flavour to the mix. So this is the image from the blog by The Solo Wargamer with his table design. I was so inspired by it, I had to make my own. Naturally I brought my own flavour to the mix.
  1. So the Winchester came first and the tiles soon followed to fit the design. I laid out the basic plan of where I wanted things and got the base black and grey done.
Using an airbrush, I highlighted the carved out grey pavement slabs. All slabs were hand carved with a Stanley knife straight into sheets of 3m MDF glued and pressed onto the TT combat tiles.Using an airbrush, I highlighted the carved out grey pavement slabs. All slabs were hand carved with a Stanley knife straight into sheets of 3m MDF glued and pressed onto the TT combat tiles.

Following the highlighted pavement, I put colour onto the custom tiles depicting a construction yard and three dug out mass graves. (yeah let’s face it, it’s dark, but also a documented strategy used by both the UK and USA for dealing with mass casualties follow apocalyptic scale pandemics).

You can also see roadworks to match how the Solo Wargamer did his. Using a couple of scars straws as the pipes.

I also used a cut off to make a circle which will become a small roundabout.

Leave a Reply

Supported by (Turn Off)