Delving back into Deadzone
Making more work for myself
20th January 2023
Bit late on the update this week, but work has been continuing on this project.
Alongside ongoing weathering, I decided to make some more work for myself by starting into some of the walls, barricades and scatter over the weekend.
The weekend gave me the opportunity to get some spraying in while it was slightly warmer, and more importantly, light!
So I took some of the pieces I had already built (walkways mostly) alongside new ones that I put together this week (barricades and walls mostly) and laid into them with the primers.
Some of the walkways I wanted to add hazard stripes to the edges of, so out came the masking tape again. For these smaller pieces I had to cut the masking tape down to thinner strips.
Then it was a case of masking them off slightly more at each stage, and spraying up again. I will do the reveal in reverse…..
The final spray, all black
Uncovering the top layer of masking 
The final revealOnce I had the walls and barricades sprayed up through red, grey to white I did a quick and dirty mask off by cutting a notch into a thick piece of box card and using that as a very basic stencil to spray the yellow through.
Then it was back to the weathering on the main buildings
The stack is building up…..
This isn't all of the buildings....
Leave a Reply