How to be an Armoured Farmer, building Hobart's Funnies in Glorious 15mm (and maybe 28mm if they arrive in time!)
Base coats
My base coat mix was 50% Vallejo black primer and 50% Vallejo thinner I also added a couple of drops of D&R flow enhancer. The regulator on the compressor was set to 25psi. As I mentioned before, I set each part onto a handle so that i could avoid touching them. I started by spraying the bases and after they dried, flipped them over and then sprayed the tops. I did two coats of this so that I achieved an even coverage.
Leave a Reply