Step 1

First of all, you’ll need a prepped base. This can be can either be fantasy or Sci-fi/modern, in this case I’ve made a simple fantasy base.

Step 2

Next, I’ve added some small stone, which will become standing stones. This base will be used as an objective marker in fantasy and historical games.

Step 3

The next step is to paint the base and stones, yep we’re going to paint stones to look like stones. The easiest way to do this is black or dark grey under coat and dry brush with a lighter grey colour.

Step 4

Once your base has dried, the next step is to make up the gore. Squeeze some UHU or similar glue on to a small tray or up turned base

Step 5

Now you will need to add some colour, for this Tamiya clear colours work best, for blood use red, and possibly a little purple. Mix the paint and glue together to create a sticky goo. You can use inks, but I found that the Tamiya Clear Colours work best. If you want to create an ooze for Nurgle then you’d use greens or yellows or a combination of the two.

Step 6

Now you have a  gooey substance, use a cocktail or matchstick to place the gore on to the base. If you want strands, you will need to dab the glue onto the area and then carefully drag the strand across to the desired area.

Step 7

Do this as many times as you want. You can also just add large patches on to the floor or other areas of the base to give a bloody and gory effect.

You can also use this method to create spiders webs, just replace the coloured ink with either PVA glue or white paint.