Skip to toolbar
24 Hour Paintathon for a Seraphon / Lizardmen Start Collecting box

24 Hour Paintathon for a Seraphon / Lizardmen Start Collecting box

Supported by (Turn Off)

Building a load of bases using GreenstuffWorlds' rolling pin and Cork

Tutoring 8
Skill 9
Idea 8
No Comments

So this happened before building the miniatures because of the involved curing times. But I do think it makes more sense posted in this way.

Materials I used are:

– The Aztec Rolling Pin from Greenstuff World, you can buy from store.ontabeltop.com,

– A smooth-rolling pin (GSTW do make one, but I just use one from baking),

– A sharp scalpel,

– I did get the stencils in base sizes from GSTW as well, but those only work before the Greenstuff is cured,

– Greenstuff,

– A 6mm Cork roll,

– PVA glue

– Stirland Mud Technical paint.

So I first rolled out the Greenstuff flat, I need those silicon rings to get it more easily into one thickness. I used a lot of water and 3mm plasticard sheets to roll the greenstuff onto, so it would not glue itself to the surface and also get a smooth as possible underside. Once I had done that I just rolled with a lot of force the Aztec pin over it. Don’t worry too much if you do not get the ornaments everywhere,  you’ll see later on why.

Leave a Reply

Supported by (Turn Off)