40k Space Wolves & Daemons Boot Sale Bargain - Help Lawnor identify and fix please (Spring Cleaning)

Where colours matched, everyone was painted the same as the Iron priest.  The only change was that I edge highlighted the blue for everyone with GW Fenrisian Grey.

Once the armour was done I worke don the fur as that can be messy.  it was base coated with P3 Bloodstone, and sections were painted over with GW Karak Stone.  It was washed with Agrax Earthshade and then drybrushed with P3 jack Bone.  The noses were picked out in black and then highlighted with Vallejo 70.995 German Grey.  Finally they were given a tiny dot of white to act as glint.

The Cloth backs of the fur was base coated with P3 Sanguine Base and then washed with a mix of Sanguine Base and p3 Exile Blue.  It then got a wash to the deep regions of the previous wash with a little P3 Coal Black added.  It was highlighted with P3 Sanguine highlight, and eventually Sanguine Highlight with a touch of P3 Menoth White Base.

Flesh: P3 Khardic Flesh base.  Washed with a mix of Khardic Flesh and P3 Thornwood Green.  Then washed with Khardic Flesh and P3 Skorne Red.  Then washed with Thornwood Green and Skorne Red.  Highlighted with P3 Midlind Flesh.

Hair: Based with either P3 Idrian Flesh (brown), P3 Ember Orange (Ginger) or P3 Mouldy Ochre (blonde).  Blonde and Ginger got a wash of GW Seraphim Sepia, and brown got a wash of Agrax.  Brown was highlighted with GW Karak Stone, and ginger with the base colour.  Then ginger and blonde were highlighted with P3 Menoth White base.

The red eyes were based with GW Khorne Red.  1/3rd of them was painted with VGA 72.709 Hot Orange, and then a dot of White was put inside that.  Normal eyes were painted normally.

The iron was painted the same as for the Iron Priest, except for the gattling gun.  Its darker sections were based the same, but then painted over with Mission Models Cold Rolled Steel.  It was then washed and highlighted the same.

The Frost Axes were based with GW Runefang Steel, then washed with GW Coelea Greenshade.  P3 Blue ink was then diluted and used to glaze the axe, especially the runes.  Finally, it was drybrushed with P3 Radiant Platinum.

The Lightning Claws were based with VMC 70.808 Blue Green, washed with diluted P3 Blue Ink, encouraging it to remain lighter towards the tips.  The tips were reclaimed with thinned Blue Green.  A little VMC 70.918 Ivory was added to  Blue Green to lighten it, and it was drybrushed over the claws.  Theyw ere then edge highlighted with GW Pallid Wych Flesh, and then thin diagonal lines were paited over then with GW Geramite White.

The wires coming out of the weapons were painted P3 Skorne Red, washed with Nuln oil, and then highlighted with GW Evil Sunz Scarlet.

The Plasma Coil was based with P3 Cygnar Blue Base.  The top half of the ridges were painted with Warcolours Marine 3.  The top half of that was then painted over with Marine 1.  Then the very corners of the ridges were painted with GW Pallid Wych Flesh.  When everything was finished this was given a final coat of gloss varnish.

The Crux Terminatus (Grey skull thing on the shoulders) was based with P3 greatcoat Grey, washed with Nuln Oil, Highlighted with VMC 70.869 and finally given one last lesser highlight with VMC 70.992 Neutral Grey.

The black and white symbols on the shoulders were either painted VMC 70.918 Ivory or P3 thamar Black.  The black was highlighted with VMC 70.995 German Grey.

The Parchment was painted GW Rakarth Flesh, eashed with Agrax Earthshade, reclaimed with thinned Rakarth Flesh and edge highlighted with Pallid Wych Flesh.

The Purity Seals were based with P3 Murderous Magenta mixed with Skorne Red, washed with nuln oil, and then reclaimed with the base colour.  Increasing amounts of ivory were added to this mix for highlights.

The black icons and the occasional pouch and holster were based with VMC German Grey, drybrushed with P3 menoth White Base and then washed with Nuln Oil.

Stones were based with P3 bastion grey, washed with Nuln Oil and then drybrushed with P3 jack Bone.  The runes were washed with Ivory as an undercoat and then painted with P3 Blue Ink.

the leather straps etc were based with P3 Bootstrap Leather, washed with Agrax Earthshade and then highlighted with Menoth White base.

The bullet casings were based with P3 Brass Balls, washed with Agrax Earthshade, and then highlighted with P3 Soild Gold.

The Gems were based with Khorne Red.  The edges were painted with Evil Sunz Scarlet.  P3 Khador Red Highlight was then painted over the top of that favouring towards the peak.  Coat d’arms Sun Yellow was then paited over the highlights.

Lenses were painted with Evil Sunz Scarlet.  A circle of GW Wild Rider Red was painted from about 5-10 on the clock and a dot of white was applied in the top around 1-2 on the clock.  These would be varnished with gloss when everything else is finished.

The lights on the back of the terminators were painted with P3 Necrotite Glow and P3 Heartfire.

Bones and teeth were painted P3 Jack bone, washed with GW Seraphim Sepia, and then drybrsuhed with P3 menoth White Base.

The Terminator guns are often coloured the same as the shoulder pads so I tried to paint them the same was I did with the shoulder.  A wash/glaze/thin paint over zenithal preshade.  However 300 coats in (I might be exaggerating) and the corners were not retaining any colour but the detail was starting to be burried.  I had 2 choices here: Start again or find a way to fix it.

I thought I’d try John’s sponge weathering along the lines hoping that once that was there the black undercoat showing through would look like the paint had worn through and the undercoat was starting to show though.  I sponged on a little VMC 302 Dark Rust and German Grey and it looked much better.  Later on when highlighting the iron I also drybrushed these edges with a tiny amount of P3 Cold Steel in places.