Shredhead's first project - My little photo booth

Supported by (Turn Off)

Project Entry by Shredhead

1 hour of building in 9 pictures

January 12, 2019

Tutoring 4

Skill 4

Idea 5

No Comments

All you need to make your own little photo booth is:

A box; a battery powered LED strip, 1 meter long; white paper or card board; a pencil; a ruler; scissors and/or cutter knife (aka box cutter, hobby knife) and glue. Check if the LED strip works. I got mine for 3 € at a Euro-store (aka Dollar/Pound shop)

Mister PVA is ogling the scene

You then proceed to cut off the cover flaps from the box. The one flap on what is to become the top of your photo booth you only partially cut off, so you can wrap the LED strip all around the top on the inside.

Cut and ready

In the next step you cut your white paper or card board to fit all the sides inside the box. Leave the upper side longer so it covers the flap you left as well. Better to make your cut outs bigger than necessary, you can always cut off overhang or bend around the corners. Glue it in. I decided to rather use the all purpose glue than PVA. When I glued in the upper square I used the tackiness of the glue to pull the flap down at an angle and let it dry like that.

I then went and measured the length (circumference) necessary for the LED strip and cut it accordingly. You can keep the rest and attach it to a battery box by soldering for other hobby projects.