Skip to toolbar
Infinity Terrain

Infinity Terrain

Supported by (Turn Off)

Barrels

Tutoring 5
Skill 6
Idea 5
No Comments

No sci-fi setting would be complete without barrels. They have been a staple for years but sadly I only own 1 GW barrel. It’s some of the objects that money does not come out of my wallet for but I have always wanted them.

I decided to try and make a more sci-fi barrel. I don’t think it’s all there yet I may come back to this but there is not much you can do with a barrel unless you are prepared to change the shape to not a barrel.

I done some sketches and just used the tools to make some shapes on the software.  The only design part I wanted, in case I wished to use these or embellish them further. I wanted a way to link the barrels via hoses this could be to mix and output the contents. This was fitted with 0.9 mm holes the same as the gas cylinder so I can use the solid core ethernet cable wires I have to fit in to pretend there are hoses I may also make connector sections for this to really ramp up the detail. I don’t know why I went with 3 possibly one for beet one for gas, connected to a mixing barrel and a tap for a sci-fi beer scene!

3d Design of the barrel3d Design of the barrel
I primed black and done a grey highlight then masked off the lower sections of the barrel. I used a lid to mount this onto with blue tack and a laser cut plug for the top to mask. Undercoated in grey then sprayed yellow/green.  I primed black and done a grey highlight then masked off the lower sections of the barrel. I used a lid to mount this onto with blue tack and a laser cut plug for the top to mask. Undercoated in grey then sprayed yellow/green.
Unmasked and handpainted details then washed (not very happy with the wash but meh!) Done, finished Barrels!Unmasked and handpainted details then washed (not very happy with the wash but meh!) Done, finished Barrels!

So there I have it. Finished barrels to join the ranks of my terrain. The bottle mounting system made this very quick to paint just spinning the lid meant I could paint without stopping due to constant movement.

Very quick project this was done today. Quite happy with this but there may be another barrel resign in the future as I learn more I may revisit this.

Next will be the roadblock but this may be next weekend or a during the week project. I have made these but they need painting and is the first time I have used Laser and resign prints together (even though this is very simple in this case).

More to come!

Leave a Reply

Supported by (Turn Off)