Skip to toolbar
Infinity Terrain

Infinity Terrain

Supported by (Turn Off)

The start of a street / industial furniture set and plans for the future.

Tutoring 2
Skill 2
Idea 2
No Comments

After the inclusion of a 3d printer and getting used to this. I have decided to do a street furniture pack for my infinity boards. The box and gas cylinder was a good start but I think more is to come and as this is the first post of the project in 2019 I think it’s a good time to set out my plans.

First of all a catch-up on this week.

I have had the resin printer learning curve this week with a fair few failures / issues with prints. This has mostly been trying to get more speed out of the printer and resin combo, I pushed it past the point in which more time was required due to layer height I think I have found the sweet spot/compromise for speed and quality for the grey resin I am using.

I think I am giving up on angling my prints for printing as well due to more supports being required and the marks this places on the surface. I still use supports but this tends to be thick bottom supports and very thin (0.20mm) supports higher up. Seems to work well.

The redesign of the cube has completed. I got out a few ok prints but changed the angle back to vertical and this fixed most issues. Only occasionally I get the odd clogged vent holes on the top of the cube, I have not pointed any yet but have 15 of these made so far.  Still to paint but I think these will be coloured tops and grey bottoms with the colour indicating the contents.

I have made traffic barriers. liquid drums and road blacks so far but I will show these on a separate post.

 

Box top with much larger holes, joined and enlarged handles.Box top with much larger holes, joined and enlarged handles.
Box bottom with thickened and enlarged bottom for easier tacking and strength.Box bottom with thickened and enlarged bottom for easier tacking and strength.

Onto my Plans for 2019 infinity.

I wanted a plan set out so if I go “what should I make next?” I have a list to pick from. I think with this it will finish off this set and give elements for other sets. This may not be an exhaustive list. I want to make the kind of things that are either expensive to buy, I don’t like the ones I have seen or that are very niche and not available.

Things to design / Build in 2019
Gas cylinders – Resin
20mm Box – Resin
Barrels – Resin
Bins – Resin
Large water road blocks / cones – Resin
Road bollards / rails – Resin
More different box / package – Resin
free standing consoles x3 – Resin
US style road blocks – Resin
Smaller gas canisters – Resin
Truck – Resin
Dumpsters – Resin
Gas cylinders container – Resin
Rectangular boxes – Resin
Small Food shops – Resin/Laser
Com Tower Resin/Laser – Resin/Laser
Large Billboard – Resin/Laser
Small Free standing advertising – Resin/Laser
Landing Pad – Resin/Laser
Small shuttle / dropship – Resin
Armoury / Security office – Resin/Laser
fuel / car charging station – Resin/Laser
lamp posts – Resin
Pleasure / suicide booths – Resin/Laser
Fire Hydrant – Resin
Tree / flower planters – Resin/Laser
Road dividers – Resin
Civilian drone / delivery system – Resin/Laser

Underlined objects have been done already.

This is not an exhaustive or binding list I am sure there will be more but this is something to be getting on with.

More to come, Very quickly this time.

Leave a Reply

Supported by (Turn Off)