Infinity Terrain

It has a name and it is Automated Factory! Didn’t do anything midweek on this but did find some time today to finish it up.

The name which was laser cut and then glued with PVA this didn’t go as well as I wanted and I ended up with some slime like residue around some of the letters. I think this was soot from the laser cutter mixed with PVA. I cleaned most of this up but this left some scratches on the paint.

The main additions are the transfers as described on other buildings bellow. After this everything got a satin varnish to protect it.

I cut some masks for the windows and also made some screens for the control screens again by printing this out and using some gloss varnish on them.

I used my airbrush to go around the base of the model and in the corners as well as add soot from the exhausts.

I then airbrushed the lights by going in with white then blue then white again.

Finishing everything of with some weathering powder on limited sections.

So this was quick, which was planned. It didn’t go on for 3 months or a year in some cases. It was quite fun and will add some height to my table.

It is a pain to photograph as it’s so large. I will need to think about this in the future but I don’t think I will do such a large footprint for a building for this set again.

Overall think it will be a good addition to my Moto-tronica set. I want some kind of communications building this may end up being tall but smaller then all the other buildings.

I think this is it for this year I need to paint some models instead, infinity and others so this may take a back seat at least for a time.

More to come, at some point.