Demogorgon by Gorka

So to start the first half of this tutorial was done with and airbrush. When spraying colors, tints and washes I always thin my paints down with a few drops of Vallejo flow improver and a couple drops of water. With that said i base coated the base with a 5:1, sombre grey:charred brown (both VGA). I was looking for about 90% coverage

Next I focused on the bigger pieces of what was the pillars and arches. I sparyed a 4:1 cold grey:charred brown (both VGA) again looking for about 90% coverage on these pieces. After that with out clean out my brush I added a couple of drops of stonewall grey (vga) to spot highlight the same rubble as before.

After the base has had time to dry i applied a wash to the whole base with about a 1:1 strong tone and medium. Try to avoid pooling on the bigger pieces. Once that was fully dried I gave the whole project a dry brush of dawnstone (gw). Next with a lighter drybush I applied administratum grey(gw) to the ruined pillars and arches. The final dry brush was applied to the freshly broken surfaces of the stone with pallid wych flesh(gw). After some dry time i applied some dry pigments. First i added slate green (secret weapon) in a stippling motion randomly but avoiding the bigger chunks of rubble. Next i did the same thing with industrial city dirt (mig). Once i was happy with the pigments i took a spray bottle with just water and gave the base a misting. This will help fix some of the pigment. After the base was COMPLETELY dried I gave the base 2 coats of model masters dull coat.

I will end up adding some vines and grass tuffs later on. For now the base is finished. Next we will be doing the green skin for the Demogorgon itself.