Skip to toolbar
Wolsung wonderings

Wolsung wonderings

Supported by (Turn Off)

Necro Golem build part 3

Tutoring 9
Skill 8
Idea 9
1 Comment

In this final entry we will look at how the arms are placed.

The left arm pieceThe left arm piece

There was a casting flaw in the arm.  There were lots of bubbles and one of the cogs was missing a tooth.  To fix it I used a trick I learned years ago from a plastic modeling magazine.  First I cover the rough area with a coat of CA glue. Then a spritz of zip kicker and it hardens.  This is then sanded flat.  If you use fine enough sandpaper, you can get it smooth as glass.

Rough bitRough bit
Covered with CA glueCovered with CA glue

Next we work on the right arm.  There were three little bits that took me a while to figure out were the fingers for this hand.

All the bitsAll the bits
Arm pinned and glued together Arm pinned and glued together
Necro Golem fully assembled!Necro Golem fully assembled!

Now it is ready for painting!

1
Leave a Reply

1 Comment threads
0 Thread replies
2 Followers
 
Most reacted comment
Hottest comment thread
1 Comment authors
144artist Recent comment authors
newest oldest most voted
144artist
Cult of Games Member
25544xp

Great trick with the CA glue and sand paper.

Supported by (Turn Off)