To the Trenches! Chain of Command
How its done ....
I dont think anything I have done here is going to be “ground breaking” or “Revolutionary” but this is the process I went through to make the trench section.
I used 2-3mm thick plywood, and cut some thin strips (about 1-2mm wide). the thickness of the plywood would be the finished facing of the wooden planks in the trench.
Once cut, I simply run a small wire brush over the length of the plywood to add more graining (I did this on both sides, purely so that when cutting to final size and glueing, it didnt matter which way I glued the pieces together).
Leave a Reply