Cold War, 3d printable armies (10 or 6mm), a thing? – OnTableTop – Home of Beasts of War

Cold War, 3d printable armies (10 or 6mm), a thing?

Supported by (Turn Off)

Tagged: 3d print

This topic contains 7 replies, has 4 voices, and was last updated by anthonys452 1 year, 11 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
January 25, 2022 at 10:29 am #1711728

captainventanus
Participant

4936xp

0

A question for those more knowledgeable about these things than I am, are there good suppliers/designers of 3d print files for Cold War era vehicles, troops etc.. in 10 or potentially 6mm.

I do have ample 15 Team Yankee forces, but recently have had the urge to play around with a small scale of game (in both senses). As I have no idea what I want to do or need in terms of models I’d like to have the flexibility of being able to print as and when.

It’s not difficult to find .stl of individual vehicles, plenty of people have uploaded designs, but what I wanted was more of collection where vehicles are actually in scale and have been tested out to make sure they work. So far I haven’t found anyone selling something like this. Does anyone know of a good source, or even bother to print out modern forces like this?

January 25, 2022 at 12:19 pm #1711762

warhammergrimace
13766xp

1

I’m going the other way. I have Team Yankee stuff but plan to play modern conflicts in 20mm or 28mm.

January 25, 2022 at 12:59 pm #1711771

khusrau
Participant

1169xp

0

Simple answer yes. In fact I was sent Kickstarter details the other day for a Cold War Soviet force. STL for 10, 25 and 28mm I think. Search on kickstarter for Soviet Vehicles of the Cold War. He previously did one for BAOR.

I have been printing off 15mm files using free ones from Bergman on Thingiverse supplemented by a couple of purchases from Wargaming 3d.

I’ve also scaled down a lot of the Bergman 15mm (1:100) WW2 files to 67% and printed those with no problem. This is a resin printer mind you. Scaling down in spool printers can be an issue.

January 26, 2022 at 10:30 am #1712027

captainventanus
Participant

4936xp

0

Thanks, found it. This is heading the direction I was after.

February 16, 2022 at 8:00 pm #1716802

captainventanus
Participant

4936xp

0

For interest, some Bergman and other 15mm stls taken down to 6mm. It works in principle and frankly is perfectly okay for this scale. On an Elegoo Mars 3 the details are pretty amazing though I suspect much will be lost when painting.

Needs some experimentation to get right though. Even light supports can mess up details so I went through lots of different positions. Turrets also need to be scaled everso slight smaller than the bodies to fit properly in the sockets.

The BMP and Bradley cannons must be the finest thing I have ever printed. And so, so easily broken. Once cured and fitted to the hulls its okay. I would print out 50% more turrets than hulls in a given batch to make good any losses.

February 16, 2022 at 11:16 pm #1716842

khusrau
Participant

1169xp

1

I’ve had excellent results scaling down 15mm (1/100) to 1/150 for 10mm wargaming. And they were all free from M Bergman on Thingiverse. On a decent resin printer the results are far superior to any metal models.

December 23, 2022 at 4:23 am #1793946

anthonys452
Participant

0xp

0

Were you ever able to find infantry STLs suitable for 6mm? I saw that soviet kickstarter, not sure if those will print scaled down to 6mm or not, so would be interested to hear if anyone has tried or had success. I’ve not been able to find anything for NATO countries sadly.

December 23, 2022 at 7:52 am #1793947

khusrau
Participant

1169xp

0

Hi, no, I still haven’t sourced small scale Cold War infantry STL. I did find some decent WW2 stuff from Wayne Peters on Thingiverse.

December 23, 2022 at 10:52 am #1793958

captainventanus
Participant

4936xp

0

As yet I haven’t found anything ether. Sooner or later someone will do something. Most of my Team Yankee games recently have been in 10mm and for the moment I am just using blank infantry bases.

December 23, 2022 at 5:04 pm #1793971

anthonys452
Participant

0xp

0

I’m really looking forward to the upcoming Chain of Command: The Cold War Game, which is natively designed for 6mm to 15mm. I love Chain of Command for WWII, and didn’t care for the FoW/Team Yankee systems (despite their gorgeous models), so I really like the idea of using that for Cold War play.

I wonder if the best bet will just be to find someone good at 6mm and commission them.
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.