The Citadel - 28mm Foam Build in Memorial of Covid 19 Wargamers lost.
Building the foundations
Following a few hours of cutting, measuring, cutting and measuring again I had all the parts needed to start the foundation of the build.
The walls are all 4 inches tall cut with a 1/2 width. The parts have then been held together with cocktail sticks acting as pins and a cheap ‘no nails’ bonding agent that contained no solvents. To fix it to the base I then punched 10 inch barbeque skewers through the sections.
The towers are build from layers all cut to the correct diameter then stacked one upon the other and pinned and glued in the same manor.
Unfortunately I didn’t capture any images of the base construction but is again simply packing polystyrene measured and cut to fit in a 24×24 inch space. This adds 8 inches of height from the floor.
Front on view
Side on view
Rear on view
Top down ViewI need to work out now where the main gate will go, and if I continue building up or start the brickwork then move yo the next levels.
- If you have any ideas or questions drop it in a comment
Leave a Reply